Environmental Technology in the Oil Industry

door Springer Netherland
Staat: Nieuw
€ 141,85
Incl. BTW - Gratis verzenden
Springer Netherland Environmental Technology in the Oil Industry
Springer Netherland - Environmental Technology in the Oil Industry

Vind je dit product leuk? Verspreid het nieuws!

€ 141,85 incl. btw
Alleen 1 items beschikbaar Alleen 1 items beschikbaar
Levering: tussen woensdag 25 mei 2022 en vrijdag 27 mei 2022
Verkoop en verzending: Dodax

Omschrijving

This significantly updated second edition of a classic work on the subject identifies the issues and constraints for each stage in the production of petroleum products – what they are, who is imposing them and why, their technical and financial implications. It then looks in detail at the technological solutions which have been found or are being developed. It also places these developments in their legal and commercial context.

Productdetails

Opmerking illustraties:
XII, 408 p.
Inhoudsopgave:
Chapter 1: General Introduction, A. Ahnell and H. O’Leary 1. Environmental Technology 2. The Beginning 3. The Environmental Effects of the Oil Industry 3.1. Air Emissions 3.2. Water Management 3.3. Waste Management 4. Technology used in the Oil Industry 4.1. Pollution Control 4.2. Pollution Prevention 5. Oil Industry Future: Design for the Environment 5.1. Design out the production problems 6. Summary References Chapter 2: Environmental control technology for Oilfield Processes, A.K. Wojtanowicz 1. Introduction 2. Environmental-control Technology 3. Evolution of Environmentally Controlled Oilfield Processes 3.1. Scope and Characteristics of Oilfield ECT 3.2. Methodology of ECT design 4. ECT Analysis of Drilling Process 4.1. Mechanisms of Drilling Waste Discharge 4.2. Sources of Drilling Waste Toxicity 4.3. Waste Generation Mechanisms in Petroleum Production 4.4. Sources of Toxicity in Produced water References Chapter 3: Environmental Control of Well Integrity, A.K. Wojtanowicz 1. Introduction 2. Mechanism of Cement Seal Failures 3. Improved Cementing for Annular Integrity 4. Cement Pulsation after Placement 5. Integrity of Injection Wells 6. Measurements of Well Integrity 7. Sustained Casinghead Pressure 7.1. Rig Methods for SCP Isolation 7.2. Rig-less technology for SCP isolation References Chapter 4: Environmental Control of Drilling Fluids and Produced Water, A.K. Wojtanowicz 1. Control of Drilling Fluid Volume 1.1. Control of Mud Dispersibility 1.2. Improved Solids Control – Closed Loop Systems 1.3. Dewatering of Drilling Fluids: ‘dry’ drilling location 2. Control of Drilling Fluid Toxicity 2.1. Drilling FluidToxicity Testing 2.2. Low-Toxicity Substitutes 2.3. Synthetic Base Drilling Fluids 2.4. Source Separation – Drill Cuttings De-oiling 3. Control of Produced Water Volume 3.1. Source Reduction – water shut-off technology 3.2. Source Separation – downhole oil/gas/water separation 3.3. Source Reduction with downhole water sink 4. Control of Produced Water Pollutants 4.1. Oil-free water from DWS drainage-production systems 4.2. Deoiling of produced water 4.3. Removal of dissolved organics from produced water 4.4. Produced water salinity reduction References Chapter 5: Oilfield Waste Disposal Control, A.K. Wojtanowicz 1. Introduction 2. Oilfield Waste Disposal to Land 2.1. Impact of oilfield pit contaminants 2.2. Oilfield pit sampling and evaluation 2.3. Oilfield pit closure: Liquid Phase 2.4. Oilfield pit closure: Solid Phase 3. Subsurface waste disposal to wells 3.1. Description of slurry injection process of muds and cuttings 3.2. Slurry fracture injection of muds and cuttings 3.3. Properties of Injected Slurries 3.4. Environmental Implications of Subsurface Slurry Injection 3.5. Periodic Injection to Multiple Fractures References Chapter 6: Drilling and production discharges in the marine environment, A.B. Doyle, S.S.R. Pappworth and D.D. Caudle 1. Introduction 2. Nature of Offshore Discharges 2.1. Produced Water 2.2. Drilling Waste 2.3. Magnitude of Waste Discharges 2.4. Accidental Discharges 2.5. Wastes that Require Handling During Site Abandonment 3. Potential Impacts on the Environment 3.1. Introduction 3.2. Potential Impacts from Produced Water 3.3. Potential Impacts from Drilling Waste 3.4. Potential Impacts from Treating
Uitgever:
Orszulik, Stefan T.;Orszulik
Opmerkingen:
Looks at each stage in the life cycle of petroleum products, from exploration to end use


Examines the environmental pressures on the Oil Industry and its response


Draws together technical developments and environmental issues in a way that will be understandable to the non-expert and expert alike


Includes supplementary material: sn.pub/extras

Mediatype:
Paperback
Uitgever:
Springer Netherland
Beoordeling:

From the reviews of the second edition:

"The book is simply fantastic. It is easy to read and understand with relevant cases and good layout. This book includes everything we needed. It covers a wide range of realistic situations. ... it contains relevant information that you can't find in a lot of books supposedly covering environmental aspects. Written primarily for those working in the oil and related industries, this book also provides essential reference material for government and research institutions and all those with an interest in environmental technological issues." (Current Engineering Practice, 2008)

Taal:
Engels
Versie:
Softcover reprint of hardcover 2nd ed. 2008
Aantal pagina’s:
408

Basisgegevens

Product Type:
Zakboek
Afmetingen pakket:
0.234 x 0.154 x 0.028 m; 0.621 kg
GTIN:
09789048173761
DUIN:
6EK7UTFPFTK
€ 141,85
We gebruiken cookies op onze website om onze diensten efficiënter en gebruiksvriendelijker te maken. Selecteer daarom "Accepteer cookies"! Lees ons Privacybeleid voor meer informatie.